GSENSE400BSI 11 um 4MP rolling shutter image sensor
The GSENSE400BSI is ideal for scientific applications where both low noise and high dynamic range are critical requirements, utilizing an 11 μm pixel to deliver 94dB dynamic range in HDR mode, 1.3 e- read noise, a peak QE of 95% and achieving frame rates up to 48 fps.
Resolution (H x V pixels)
Pixel size (μm)
Optical format (mm/inches)
Frame rate (fps full resolution)
Shutter type
Chroma
The GSENSE400BSI is a high-performance 2k x 2k image sensor designed for the most demanding scientific applications. It’s generous 11 μm rolling shutter pixel combined with the sensor’s dual gain HDR functionality deliver over 94 dB of dynamic range while maintaining a frame rate of 24 fps. If higher frame rates are required, 48 fps can be sustained in standard imaging mode with a dynamic range of 65 dB. The sensor’s exceptional sensitivity is due to its 1.3 e- read noise floor, low dark current, and backside thinning technology with peak QE of 95%. The 12bit data is delivered over 8 pairs of LVDS outputs and the total power consumption is below 650 mW. The sensor is packaged in a 115-pin PGA with removable cover glass for easy integration into cooled camera systems. The 22.5 mm x 22.5 mm square active imaging area is ideally sized for microscopy applications. Whether used to capture long exposures of faraway nebulae or for high-throughput imaging of biological samples, the GSENSE400BSI is the scientific industry’s high-performance imaging workhorse.
– Backside Illumination scientific CMOS
– Peak QE of 95%
– Low noise, low power for long exposure modes
Photosensive area
Pixel size
Angular response
Dark current
Maximum frame rate
Supply voltages
Power consumption
GSENSE400BSI-BBM-NPN-AR1
115-pin PGA package, Removable D 263® T eco glass lid without AR coating on both sides,
Grade 1
GSENSE400BSI-BBM-NPN-AR2
115-pin PGA package, Removable D 263® T eco glass lid without AR coating on both sides,
Grade 2
GSENSE400BSI-BPM-NPN-AR1
115-pin PGA package, Removable D 263® T eco glass lid without AR coating on both sides, PulSar Variant,
Grade 1
GSENSE400BSI-BPM-NPN-AR2
115-pin PGA package, Removable D 263® T eco glass lid without AR coating on both sides, PulSar Variant,
Grade 2
EVA-400B-ST12
Evaluation board
Operation mode:STD mode
Lens holder: T-mount
Interface: Camra link MDR-MDR
EVA-400B-SC12
Evaluation board
Operation mode:STD mode
Lens holder: C-mount
Interface: Camra link MDR-MDR
EVA-400B-RT12
Evaluation board
Operation mode:HDR mode
Lens holder: T-mount
Interface: Camra link MDR-MDR
EVA-400B-RC12
Evaluation board
Operation mode:HDR mode
Lens holder: C-mount
Interface: Camra link MDR-MDR